UFACTORY · Robot arm
UFACTORY xArm 6
Compact six-axis arm for research and prototyping
Purchase price From about US$9,029
- Payload
- 5 kg
- Reach
- 700 mm
- Repeatability
- ±0.1 mm
- Weight
- 12.5 kg
- Control
- Python, C++, ROS/ROS2
- Best for
- Research and prototyping
Up close
The UFACTORY xArm 6 is a compact six-axis robot arm for university research, education, prototyping and light pick and place. It carries 5 kg (including gripper and camera), reaches 700 mm, repeats to ±0.1 mm and weighs 12.5 kg. It mounts upright, sideways or inverted and is programmed with UFACTORY Studio, Python, C++, ROS/ROS2 or Modbus.
Key features
5 kg payload
Light grippers and cameras.
700 mm reach
Benches and test rigs.
Open development
Python, C++, ROS, ROS2.
Any mounting
Upright, sideways or inverted.
Is it right for you?
Good fit if
- University research and prototyping
- Light pick and place under 5 kg
Not ideal if
- Loads over 5 kg
- Wet or heavy production cells
Where it works
Specifications
- Robot type
- Six-axis robot arm
- Operating environment
- Indoor; IP40
- Mounting
- Upright, sideways or inverted; Ø126 mm base
- Payload
- 5 kg
- Reach
- 700 mm
- Repeatability
- ±0.1 mm
- Degrees of freedom
- 6 axes
- Max speed
- 1 m/s at the tool; 180°/s per joint
- Battery / power
- 100–240 VAC; about 200 W
- Navigation / control
- UFACTORY Studio, Python, C++, ROS/ROS2, Modbus
- Weight
- 12.5 kg
Pricing
Questions
Does 5 kg include the gripper?
Yes: gripper, camera, brackets, cables and part all count.
Warranty?
Usually one year limited; confirm regional cover.
Enquire about this robot
Tell us about your event and we’ll be in touch within one business day.
Bring this robot to your event.
Start an enquiryNo obligation · Response within one business day