- Payload
- 10 kg (12 kg wrist-down)
- Reach
- 1,620 mm
- Repeatability
- ±0.02 mm
- Speed
- Up to 2.0 m/s
- Protection
- IP67
- Best for
- Palletising and tending
間近で見る
The ABB GoFa 10 is a six-axis cobot for palletising, machine tending, assembly, welding, screwdriving and inspection. It carries 10 kg (12 kg wrist-down), reaches 1.62 m, repeats to ±0.02 mm and moves at up to 2 m/s. Torque sensors in all six joints give Cat 3 PL d safety, the arm is IP67, and it runs on ABB's OmniCore C30 controller.
主な機能
1.62 m reach
Pallets and large machines.
±0.02 mm
Precise placement.
Torque-sensed safety
Cat 3 PL d.
あなたに合っていますか?
こんな場合に最適
- Palletising and tending at ~10 kg
- Teams using RobotStudio or Wizard
こんな場合は不向き
- Loads above 10–12 kg
- Expecting a finished cell without tooling or risk assessment
活用シーン
仕様
- Robot type
- Collaborative robot arm
- Operating environment
- Indoor industrial; IP67
- Payload
- 10 kg; 12 kg wrist-down
- Reach
- 1,520 mm to wrist; 1,620 mm to flange
- Repeatability
- ±0.02 mm
- Degrees of freedom
- 6 axes
- Max speed
- Up to 2.0 m/s
- Battery / power
- OmniCore C30; 100–230 VAC
- Navigation / control
- RobotStudio, Wizard easy programming
- Sensors
- Torque sensors in all six joints
- Weight
- About 51 kg
料金
🇺🇸米国
問い合わせるよくある質問
Does 10 kg include the gripper?
Yes, so the part you can carry is 10 kg minus the tooling.
このロボットについて問い合わせる
イベントについて教えてください。1営業日以内にご連絡します。
このロボットをあなたのイベントへ。
問い合わせを始める義務なし · 1営業日以内に返信